With suitable preservatives that provide protection to the varnish against fungi and their effects (bluish and rot). It penetrates deep into the pores of the wood and facilitates the adhesion of subsequent layers other products. Suitable for use on wood both indoors and outdoors.
Surface preparation
The wood must be clean and dry. It is essential, a previous sanding to improve the results. Remove waxes, greases and old paints or varnishes. On surfaces with aged and deteriorated varnish. Remove this layer previously and proceed as on clean and dry woods. When it comes to tropical or very resinous woods, clean them with nitro cellulosic solvent.
Before applying
Do not apply at temperatures below 5ºC
How to use
A.- EXTERIOR SURFACES: Proceed to the application by the chosen system, of a hand of WOODOXIL BOTTOM TO THE WATER, after 24 hours, and after sanding, apply the first coat of WOODOXIL FINISH in the desired color. After 1 or 2 hours, sand gently and proceed to give the second hand of WOODOXILFINISH (2-3 hours). For a more optimal finish, it is recommended to apply two coats of WOODOXIL BOTTOM TO WATER, letting it dry properly 24 hours and sanding later from each hand, prior to the application of WOODOXILFINISH. B.- INTERIOR SURFACES: Give a coat of WOODOXIL FINISH in the chosen color if you want a matte finish and two hands when you want to obtain a satin finish. For a better finish, previously apply a coat of WOODOXIL BOTTOM TO THE WATER, and after 24 hours, sand before applying the WOODOXILFINISH. Carefully sand between hands.
Storage
Up to one year in places protected from frost with the container closed.
Calculate how much you need:
With suitable preservatives that provide protection to the varnish against fungi and their effects (bluish and rot). It penetrates deep into the pores of the wood and facilitates the adhesion of subsequent layers other products. Suitable for use on wood both indoors and outdoors.
