- Out-of-Stock

Recommended in gun applications in new construction, in warehouses, garages, large surfaces ... Uniform finishes are obtained with a marked whiteness and good washability.
Surface preparation
Carefully remove imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc.
Before applying
Working temperature, should never be below 5ºC
How to use
1º.- On low absorbent surfaces (perliescayola, projected plaster, plasterboard): Apply a first coat diluted with 5-10% water. After 2-3 hours, give the second coat diluted 5% with water 2º.- On absorbent surfaces. Previously apply a fixative (ULTRAFINE JAYOKRIL) and proceed then as in the previous case. If desired, it can be dyed with our universal EGATEX dyes.
Storage
UP TO ONE YEAR in places protected from frost. If the container has been opened, close it tightly and use the contents within 30 days.
Calculate how much you need: