Suitable for painting interior and exterior surfaces, protected with special fungicides. Uniform finishes are obtained with a marked whiteness and good washability.
Surface preparation
Carefully remove imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc.
Before applying
Working temperature, should never be below 5ºC
How to use
1º.- On cement, plaster and plaster: Apply a first coat diluted with 5-10% water. After 4-6 hours, give the second hand to use or, diluted with 5%. 2º.- On tempera, lime, old paints, very absorbent backgrounds and poorly consolidated surfaces. Eliminate, previously, where appropriate, tempers, lime and poorly adhered parts. After sanding the surface and removing the dust, proceed to the application of a fixative (JAYOKRIL indoors or ULTRAFINE JAYOKRIL indoors and outdoors). Once the fixative has dried, apply two coats as referred to in paragraph 1.
Storage
UP TO ONE YEAR in places protected from frost. If the container has been opened, close it tightly and use the contents within 30 days.
Calculate how much you need:
Suitable for painting interior and exterior surfaces, protected with special fungicides. Uniform finishes are obtained with a marked whiteness and good washability.
