STREICHPUTZ, presents great hardness and fills the microcracks. The resins used give it great resistance to aging and weathering. The quality of the pigments used are of great stability to light, and resist ultraviolet rays. It is waterproof and, at the same time, facilitates the transpiration of water vapor (membrane effect).
Surface preparation
Eliminate imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc. In the case of carbonated or salty surfaces, it is advisable to brush and wash beforehand. The exterior surfaces treated with MATT PLIOLITE PAINT are not damaged by rain even if it occurs after it has been applied.
Before applying
Do not apply when temperatures below +5ºC or rainfall are expected, or temperatures above +30ºC or in full sun.
How to use
1º.- On cement, plaster and plaster: Apply a first coat diluted with 10-15% water. After 2-3 hours, give the second hand undiluted or, at most, 5%. 2º.- On lime and old paints: On well adhered lime, it can be applied directly. When limescale thicknesses are excessive, as a result of the application of several hands and there are problems of detachment, the limescale layers must be removed. In general, remove poorly adhered parts and correct imperfections by sanding. Once it has proceeded, as the case may be, as indicated above, to apply two coats in the manner recommended in paragraph 1. 3º.- On tempers, very absorbent bottoms and poorly consolidated surfaces. Remove, where appropriate, the tempers and poorly adhered parts. Once the surfaces have been sanded and the dust removed, proceed to the application of an ULTRAFINE JAYOKRIL sealant. After drying the sealant, apply two coats as indicated in Section 1.
Storage
Up to a year in places protected from frost. If the container has been opened, close it tightly and use the contents within 30 days.
Calculate how much you need:
STREICHPUTZ, presents great hardness and fills the microcracks. The resins used give it great resistance to aging and weathering. The quality of the pigments used are of great stability to light, and resist ultraviolet rays. It is waterproof and, at the same time, facilitates the transpiration of water vapor (membrane effect).
