Specially designed for the decoration and protection of facades and exterior surfaces in general.
Surface preparation
"Remove imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc. Check that the plaster does not contain salts (wet with water and let dry)"
Before applying
Unlike plastic paints, whose working temperature must be higher than +5ºC, it can be applied with temperatures up to below zero.
How to use
On new, hard and dry surfaces: Apply one coat of STREICHPUTZ LISO diluted to 10% and, once dry, apply a second coat of STREICHPUTZ SMOOTH, undiluted. On tempera, lime, old paints in good condition or very absorbent surfaces: Previously treat the surface, with FASSANOL or ULTRAFINE JAYOKRIL without dilution. After 1 or 2 hours apply a first coat of STREICHPUTZ LISO diluted to 10%. Give a second coat of STREICHPUTZ SMOOTH, undiluted, after 3-4 hours of application of the first. On projected plaster, perlite or poorly absorbent surfaces and in good condition: Apply a coat of ULTRAFINE JAYOCRIL without diluting and then proceed to apply the STREICHPUTZ SMOOTH as in the previous cases.
Storage
Up to a year in places protected from frost. If the container has been opened, close it tightly and use the contents within 30 days.
Calculate how much you need:
Specially designed for the decoration and protection of facades and exterior surfaces in general.
