- Out-of-Stock

Developed to be applied directly on masonry surfaces, even wet or wet, a white, silky, pleasant-looking finish is obtained. Once dry, it closes the passage and displaces moisture, while allowing perspiration of the support.
Surface preparation
Proceed to the removal of poorly adhered paints, dust, grease and dirt. Taking fouls.
How to use
Apply the first coat essentially, with a brush, without it being abundant and, trying not to insist too much, to avoid damaging the product. The following hands apply them with roller, for smoother finishes of short hair and if they are used of wool we will leave more layer but the finish will be more textured and therefore, it is convenient to use used rollers. The minimum thickness of the applied paint will be 500 microns, which are achieved by applying 1 Lt / m2. Do not apply to gun. 1.- On new, solid and dry surfaces (cement, plaster, plaster, etc.): It can be applied directly. 2.- On soft or very absorbent surfaces, tempera, lime, old paints, etc.: Previously apply JAYOKRIL or ULTRAFINE JAYOKRIL. Then the PHONOTHERMAL 3.- On iron, zinc, etc.: In the case of ferrous metals, previously remove rust, calamine, grease, etc., by any traditional mechanical method or sandblasting. Then give a hand of our antioxidant ANTIOXIDANT PRIMER, etc. If you want to avoid the work of removing rust, you can apply our CONVERTOXIDE Oxide Converter. Then apply the PHONEMAL. In the case of zinc surfaces or light alloys, give our SHOP-PRIMER primer prior to the application of the PHONETHERMAL 4.- On dark colors, it is recommended to first apply a coat of matt plastic or smooth stone in white color and, then, continue with the PHONOTHERMAL system. 5.- On surfaces with nicotine stains, grease, moisture stains, etc. First apply a coat of RUBBATEX WITHOUT ODOR letting it dry for 4 or 5 days, then apply the PHONOTHERMAL system.
Calculate how much you need: