• Out-of-Stock
Pavonatto
search
  • Pavonatto

Pavonatto

METAL DECORATION SYSTEMS
Colorega
C. TECHNIQUES
COLORS
C. APPLICATION

Thixotropic metallic paint, antioxidant, pigmented with micaceous iron oxide, studied to beautify and complement primary antioxidants. Ideal for decorating iron surfaces: gates, railings, doors, lampposts, bridges, stairs, etc. It is an effective protection system, due to its resistance to weathering, adhesion and elasticity and beauty of finish.

Rust and corrosion resistance
Forging finish
Weather resistance
Very decorative

Tiempo de secado
Dilution SOLVENT 221 (GUN) 224 (BRUSH, ROLLER)
Tiempo de secado
T. Drying 8 hours
Tiempo de secado
T. Repainting 24 hours
Tiempo de secado
Yield 11-12 M2 /L
colores
steel grey
forge grey
black forge
metallic letter colors

Surface preparation

Eliminate imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc.

How to use

For the application of the MARTELE, the best system will be to initially give a very thin layer, with the trigger of the gun at half travel and then give a second layer with the trigger pressed thoroughly, or two quick crossed hands depending on the desired finish. Depending on whether one system or another is used, performance will vary accordingly. Application system: 1.- Ferrous metals: For better protection to the outside and greater adhesion it is recommended to give a synthetic primer beforehand, we recommend our I-500 PRIMERS. 2.- Non-ferrous metals (Aluminum, Galvanized, etc.) On these metals, it is highly advisable, before applying the MARTELE, to give a coat of SHOP-PRIMER phosphating primer, in order to ensure the adhesion of the MARTELE. 3.- Old surfaces: On surfaces in poor condition qualify the surfaces and remove traces of oxide, chipping, etc., and proceed as indicated in section 1. Application: A PISTOL. It is recommended to apply with an air pressure, between 3-5 atmospheres, with nozzles of 1.8-2.2 mm., and at a distance of approximately 30 cm.

Storage

UP TO ONE YEAR in places protected from frost. If the container has been opened, close it tightly and use the contents shortly.

Calculate how much you need:

Total area
m2
Layers
QUANTITY NEEDED --