Especially suitable for priming steel or iron surfaces, both in metal structures, machinery, truck bodies, etc.
Surface preparation
The steel must be clean, dry and free of rust, calamine, grease, etc. The most appropriate system is sandblasting, in case of technical impossibility, we recommend letting the metal oxidize for a few months, outdoors, and then remove the rust by the appropriate traditional mechanical means. If the surface has grease or oil, clean with a suitable degreaser.
Before you apply How to use
Application preferably by airbrush, after dilution with 15% by weight (25% by volume), of our Solvent No. 221 up to a viscosity of 20-25 "(Ford Cup No. 4). With air equipment, dilute with half the solvent. Also by brush, diluting 5-10% by weight with our Solvent No. 224. A minimum period of 24 hours at 20ºC is recommended. Shorter times can cause wrinkling and loss of brightness of the finishes. It can be repainted with synthetic enamels (Egasint, Egalux, Pavonatto, etc.), chlororubber (Vitripaint Industrial), etc.
Storage
UP TO ONE YEAR, in places protected from frost. If the container has been opened, close it tightly, and use the contents shortly.
Especially suitable for priming steel or iron surfaces, both in metal structures, machinery, truck bodies, etc.
