Special for tanks, tanks or pipes of concrete or steel that must contain drinking water, according to Report 2015762 made on January 28, 2016 by the LABAQUA laboratory, "Report of migration of compounds according to Standard UNE-EN 12873-2/2005 of products intended to be in contact with water of human contact "
Surface preparation
The support must be clean, dry and free of contaminants (grease, oil, old paints, etc.). If the concrete is new, it should be completely set.
Before applying
The ambient temperature and that of the substrate must be above 8ºC, during application and curing. The surface temperature should be above the dew point to avoid condensation. The relative humidity should be less than 80% during application and curing.
How to use
It is an antioxidant primer, so it should always be coated with a finishing paint. It serves as a base layer for alkyd paints and under certain conditions with two-component products controlling that the minimum repainting interval is 48 hours at 20º C.
Calculate how much you need:
Special for tanks, tanks or pipes of concrete or steel that must contain drinking water, according to Report 2015762 made on January 28, 2016 by the LABAQUA laboratory, "Report of migration of compounds according to Standard UNE-EN 12873-2/2005 of products intended to be in contact with water of human contact "
