- Out-of-Stock

Suitable to give a medium-fine finish to continuous coatings of high decoration and high performance, such as those obtained with our EGACEMENTI MEDIO. It finds its field of application both in floors and walls, housing, offices, premises, commercial surfaces. It can be applied in kitchens and bathrooms. In addition, its use can be both indoors and outdoors.
Surface preparation
The support must be clean, dry, free of contaminants such as dust, grease, oils, etc. And free of saltpeter, mold, algae, etc. On plasters, plasterboard or old paints apply 1 or 2 hands of FASALINA. On metal or wood use suitable sealers. If the mineral support is badly damaged, first apply our ULTRAFINE JAYOKRIL as a consolidating primer.
Before applying
As for the recommended working temperature will be between 8 and 30 ºC, monitoring the real conditions of the support. On overheated or dry surfaces, slightly wet the surface with water.
How to use
A lower or greater consistency of the fresh product can be obtained when applying, for this, before preparing the mixture reserve approximately 15% by weight or volume of CATALYST EGACEMENTI. Once the mixture is homogenized and free of lumps, the reserved catalyst will be slowly added until it is observed that the viscosity is ideal for the application, regardless of whether part of the reserved catalyst is left over. In case of making a color the dye must be added on the CATALYST EGACEMENTI before mixing with the EGACEMENTI FINO. The ideal is to pour the EGACEMENTI FINO, solid, on the CATALYST EGACEMENTI, liquid, slowly and with electric mixer, Homogenize at high revolutions until the product is free of lumps. The life of the mixture is 2 hours. It has a fine finish.
Calculate how much you need: