Special to reproduce, among others, the decorative effects type suede (suede), shadows, granite, marbled, scrubbed with sponge, on reliefs, etc., on interior surfaces, properly prepared, plaster, plasterboard, fiber cement, etc., in public buildings, museums, hotels, offices, cafes, private homes, etc.
Surface preparation
Remove dust, grease and other contaminants by mechanical or manual procedures. Level irregularities with suitable plasters or putties. Let dry. Sanding and removing dust. If the support is morbid or lacking cohesion, apply a layer, at saturation, of ULTRAFINE JAYOKRIL.
Before applying
Application temperature: Not lower than +5ºC, nor higher than 40ºC.
How to use
Apply a thin layer of WAX VENETTO, diluted between 10% and 30% with SOLVENT nº 224, with a clean cloth that does not leave lint. Immediately after application polish with a dry cloth by circular movements, or with drill to which we will have incorporated a "beret" of lambskin to polish. To dissolve WAX VENETTO wax it is recommended to gently heat the "water bath", until it is transparent. Add the solvent part nº224 and let cool.
Storage
Up to a year in places protected from frost. If the container has been opened, close it tightly and use the contents shortly.
Calculate how much you need:
Special to reproduce, among others, the decorative effects type suede (suede), shadows, granite, marbled, scrubbed with sponge, on reliefs, etc., on interior surfaces, properly prepared, plaster, plasterboard, fiber cement, etc., in public buildings, museums, hotels, offices, cafes, private homes, etc.
