Surface preparation
How to use
1.- On a prepared background, apply with stainless steel trowel, one or more hands of VENETTO, to obtain uniform color and thickness. 2.- After 24 hours, sand with fine-grained sandpaper (from nº 240) and then remove the dust carefully. 3.- With a stainless steel spatula, give a layer of VENETTO, very thin. The spatulate technique consists of evenly distancing each spatulate stroke and then applying the same technique between the previously unspatulate spaces. 4.- Before elapsed, approximately 20 minutes, proceed to polishing and polishing, by rubbing with a spatula, pressing lightly. If a greater shine is desired, a thin layer of our WAX VENETTO wax can be applied, as follows: a).- Spread the wax with cloth, trowel or spatula. A yield of 20-30 m2/lt is obtained. b).- Polish with a rag or lambskin after 5-10 minutes by hand, or with a polisher.
