• Out-of-Stock
Woodoxil Finish to water
search
  • Woodoxil Finish to water

Woodoxil Finish to water

EXTERNAL PROTECTORS
C. TECHNIQUES
COLORS
C. APPLICATION

Its microporous character allows penetration into the wood and, by not forming layers, prevents the appearance of cracks, cracks and scales. It has a transparency and enhances the grain of the wood, being therefore solid to the light all of them, even colorless, and therefore suitable for outdoor applications. It protects wood against the destructive action of ultraviolet rays, polluted, aggressive, marine and high mountain environments, as well as fungal attacks, woodworm and moisture. Repels water, dust and dirt. It regulates humidity and 'compensates, the natural movements of the wood. Decorate, protect and beautify wooden houses, doors, windows, fences, etc., both outdoors and indoors.

Ecological
Good pore filling
UV Protection
Enhances wood grain
Fireproof

Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 1 hour
Tiempo de secado
T. Repainting 2 hours
Tiempo de secado
Yield 14-16 M2 /L
colores
colourless
pine
walnut
oak
teak
chestnut
mahogany
rosewood
ebony
green

Surface preparation

The wood must be clean and dry. It is essential, a previous sanding to improve the results. Where appropriate, remove waxes, greases and old paints or varnishes. IMPORTANT: In the case of tropical woods such as Iroco, similar or very resinous, in which there may be surface oil, remove it with nitrocellulosic solvent type TEPPILACK SOLVENT, since, otherwise, it could interfere with the drying of successive hands of varnish.

Before applying

APPLICATION TEMPERATURE: Should not be lower than 5ºC.

How to use Storage

Up to a year in places protected from frost. If the container has been opened, close it tightly and use the contents shortly.

Calculate how much you need:

Total area
m2
Layers
QUANTITY NEEDED --