Suitable for waterproofing vertical or very inclined surfaces that are made up of porous mineral materials: brick, calcareous sandstone, natural stone, concrete, etc. Without leaving on these an appreciable product film.
Surface preparation
Surfaces must be mineral, absorbent and dry and clean. In addition, the following extremes must be taken into account: Deteriorated stones must be replaced. The joints of the walls or facades must be in perfect condition. Fill cracks larger than 0.3 mm. Expansion joints must be watertight and solvent-resistant. Roof, window and door joints should not be defective. The joints of roof gutters and drainage pipes must be watertight. There should be no rising moisture coming from the soil. There should be no algae, mosses, or efflorescence of salts.
Before applying
Working temperature: Between +10 and +25ºC.
How to use
APPLICATION: Brush, brushstroke, gun, immersion, injection. When it comes to protecting and decorating, we will proceed as follows: INDOORS: Two hands of impregnation of WOODOXIL ANTICARCOMA For a better finish one hand of WOODOXIL BACKGROUND. Two hands of colorless WOODOXIL FINISH or color chosen from the color chart. OUTDOORS: Two hands of impregnation of WOODOXIL ANTICARCOMA One hand of WOODOXIL BACKGROUND. For a more optimal finish, apply a second coat of WOODOXIL FONDO, sanding after applying each hand and finish with two coats of WOODOXIL FINISH in the color chosen from the color chart.
Suitable for waterproofing vertical or very inclined surfaces that are made up of porous mineral materials: brick, calcareous sandstone, natural stone, concrete, etc. Without leaving on these an appreciable product film.
