Suitable for waterproofing facades of exposed brick, stone, concrete, mortars, .... . As a sealant on plaster and mortars in good condition, not crumbly
Surface preparation
Make sure that the surface to be applied is clean. Free of saltpeters, fats, chippings and efflorescences.
Before applying
Relative humidity less than 80%. Environmental temperature above 5ºC. Do not apply with frost or dew. Do not apply if there is a risk of early rain. It is not convenient to apply with very high support temperatures or in full sun.
How to use
The impregnation is perfect, when the surface is saturated with water-repellent, that is, when it does not absorb more in the interval of one minute. In the case of very porous surfaces, a second coat should be applied as soon as the shiny appearance of the first layer disappears. The consumption is very variable, depending on the absorbent power of the treated surface. It is advisable to perform a test to determine, in each case. The facades treated with INVISIBLE WATER-repellent, can be painted with all systems formulated based on solvents. Do not apply water-based paint systems, as wetting problems may occur.
Storage
Storage: Up to one year in places protected from frost. If the container has been opened, close it tightly and use the contents shortly
Calculate how much you need:
Suitable for waterproofing facades of exposed brick, stone, concrete, mortars, .... . As a sealant on plaster and mortars in good condition, not crumbly
