It adheres perfectly and forms a rubbery film of great elasticity and totally impervious to water, once 16 to 24 hours have elapsed since its application. At the same time, it allows sufficient transpiration of water vapor. It is especially suitable for tile and terrazzo insulation on rooftops, terraces, roofs, etc.
Surface preparation
Cement surfaces; asbestos-cement, terracotta and old bituminous coatings should be clean of dust, dirt and dry. By brushing, chips and poorly adhered parts should be removed before proceeding to application. In the case of zinc-plated sheet, it must be clean, dry and perfectly degreased. Surfaces with cracks and gaps, not exceeding 1 millimetre, must be repaired beforehand.
Before applying
Working temperature: IT SHOULD NOT BE LOWER THAN +5ºC, NOR HIGHER THAN +40ºC Do not apply on very humid and / or rainy days. Avoid the application, when rains are expected before 16 hours of it.
How to use
Dilute with water depending on the desired final appearance (up to 100% by weight maximum). Apply 1 or 2 hands spreading them in thin and uniform layers.
Storage
UP TO ONE YEAR in places protected from frost. If the container has been opened, close it tightly and use the contents within 30 days
It adheres perfectly and forms a rubbery film of great elasticity and totally impervious to water, once 16 to 24 hours have elapsed since its application. At the same time, it allows sufficient transpiration of water vapor. It is especially suitable for tile and terrazzo insulation on rooftops, terraces, roofs, etc.
