Suitable for priming wood, untreated, matt or satin plastic paints that take more than 30 days. It is used indoors and outdoors as a bridge before applying SYLIFLEX.
Surface preparation
Substrates must be clean, dry, in good condition and free of substances impeding adhesion.
Before applying
Working temperature. Both the ambient temperature and that of the support Minimum: +8ºC, Maximum: +25ºC.
How to use
A.- On new substrates or in good condition, low or regular absorption: 1º.- Apply a coat of SYLIFLEX paint, diluted 5-10% with SYLIFLEX SEALANT. 2º.- After a minimum of 12 hours give one or more layers of SYLIFLEX paint. B.- On new substrates or in good condition, of high and irregular absorption: lº.- Apply a layer of SYLIFLEX Sealer. 2º.- After a minimum of 12 hours, give a coat of undiluted SYLIFLEX paint. 3º.- Leaving a minimum interval of 12 hours, give one or more coats of SYLIFLEX Paint.
Storage
UP TO 6 MONTHS, in places protected from frost. If the container has been opened, close it tightly and use the contents of the pack within 30 days.
Calculate how much you need:
Suitable for priming wood, untreated, matt or satin plastic paints that take more than 30 days. It is used indoors and outdoors as a bridge before applying SYLIFLEX.
