It is a primer for fixation, consolidation and regularization of absorption; Both indoor and outdoor based on potassium silicate. It is also used as a solvent for SYLIFLEX silicate paints.
Surface preparation
"Substrates must be clean, dry, in good condition and free of substances impeding adhesion."
Before applying
Working temperature. Both the ambient temperature and that of the support Minimum: +8ºC, Maximum: +25ºC. SYLIFLEX SEALANT should not be applied when the weather is excessively dry, very hot, very strong wind, fog, high humidity, persistent rain or night frosts.
How to use
On surfaces that have been painted with lime, lime should be completely removed by mechanical brushing. In the case of old silicate coatings, thoroughly clean the well-adhered layers with a dry brush or water. Old layers, in poor condition, remove them by mechanical means and carefully rinse with water. Surfaces with mold problems should be brushed vigorously and cleaned with water and bleach or some specific product for mold. Later it should be rinsed with fresh water and allowed to dry. In the case of natural stone, it must be in good condition, dry and without efflorescence, if it exists, remove them with a dry brush. If there is rising soil moisture, silicate coatings deteriorate prematurely. In this case, two coats of STOPHUMIDITY Anti-Humidity Sealer can be applied beforehand. If there are small cracks or faults, these must be previously repaired before applying the paint.
Storage
UP TO 6 MONTHS, in places protected from frost. If the container has been opened, close it tightly and use the contents of the pack within 30 days.
Calculate how much you need:
It is a primer for fixation, consolidation and regularization of absorption; Both indoor and outdoor based on potassium silicate. It is also used as a solvent for SYLIFLEX silicate paints.
