In the supports, both exterior and interior, where the anchoring difficulties occur with greater intensity (perlite, tempering, surfaces in poor condition, etc.) the ultrafine particles that are endowed, provide a consolidation and sealing of the surfaces that, guarantee, the subsequent adhesion of the finishing paints.
Surface preparation
Remove dirt and poorly adhered parts
Before applying
It must not be less than 5ºC, nor higher than 40ºC
How to use
On porous surfaces apply a first diluted coat diluting up to 1:1 depending on the absorption of the support. Then apply 1 or two hands to use.
Storage
Up to 6 months in places protected from frost.
Calculate how much you need:
In the supports, both exterior and interior, where the anchoring difficulties occur with greater intensity (perlite, tempering, surfaces in poor condition, etc.) the ultrafine particles that are endowed, provide a consolidation and sealing of the surfaces that, guarantee, the subsequent adhesion of the finishing paints.
