- Out-of-Stock

Designed for rehabilitation and repainting, it can be applied both in normal processes and on old facades or with lime, due to the low voltage presented by the film. In addition, it is characterized by good breathability. Easy to apply SILEXPLAST, presents excellent whiteness, very good coverage and is washable.
Surface preparation
Eliminate imperfections and adhesions, sanding and cleaning to remove saltpeters, greases, old paints, dust, etc.
Before applying
Working temperature, should never be below 5ºC
How to use
1º.- On new, hard and dry surfaces: Apply one coat of STREICHPUTZ RUGOSO diluted to 10% and, once dry, apply a second coat of STREICHPUTZ RUGOSO, undiluted. 2º.- On tempera, lime, old paints in good condition or very absorbent surfaces: Previously treat the surface, with diluted JAYOCRIL (1 part of JAYOCRIL with 4 of water) or ULTRAFINE JAYOCRIL without dilution. After 1 or 2 hours apply a first coat of STREICHPUTZ RUGOSO diluted to 10%. Give a second coat of STREICHPUTZ ROUGHOSO, undiluted, after 4-6 hours of the application of the first. 3º.- On projected plaster, perlite or surfaces with little absorbent and in good condition: Apply a coat of ULTRAFINE JAYOCRIL without diluting and then proceed to apply the STREICHPUTZ RUGOSO as in the previous cases. 4º.- For highly waterproofing protections: Treat the support with TEPPIGUM according to the cases contemplated in the Technical Sheet of this product. Once applied and dried the TEPPIGUM give a coat of STREICHPUTZ RUGOSO diluted to 10% with water. After 4-6 hours give a second hand of STREICHPUTZ RUGOSO undiluted.
Storage
Up to a year in places protected from frost. If the container has been opened, close it tightly and use the contents shortly.
Calculate how much you need: